Orthopedic devices for penis enlargement have been used by men for more than a decade and have proven themselves to be positive. The most widespread device is called extender, which is translated from English as expander or filler. This fully meets its purpose. It is characterized by simple construction and assembly, which allows men to use both a purchased (factory) and a homemade extender. It's pretty easy to prepare. The main thing is to have the necessary materials and basic knowledge of the mechanics of the intimate apparatus.
Types and effects of extenders
The device works on the principle of proliferation of erectile tissue. This happens under the condition of regular tension of the fabric by periodically unwinding the axes in the direction of increasing length. The growth of new tissue does not stop; Cells divide under the constant influence of the distraction force.
According to user and manufacturer reviews, the average growth rate is an increase in length of 2-5 centimeters over a period of 6 to 10 months. You should not expect instant results. It requires patience and regular use of the extender. Violation of this recommendation will result in the desired effect not being achieved.
Depending on the type of attachment, extenders are divided into different types. If you plan to assemble a home version, you need to understand how they differ from each other.
Vacuum extender
The belt is manufactured using a special vacuum chamber. It covers the head of the penis with a circumference of about 3 to 7 centimeters. It is considered the most reliable and safe. The risk of injury is reduced to practically zero as there is no risk of compression.
Extender for penis enlargement
Loop and strap extension
The fastening mechanics are almost the same, but the fastening form is different. In the first case, a loop is used, in the second - a strap. The difference gives these species a significant difference.
The strap is lined with gauze so compression is minimal. The sling, on the other hand, can severely compress the head and cut off the blood supply to the reproductive organ, but remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of devices listed. The most difficult model to make will be the vacuum model, as a chamber needs to be built. Otherwise, the process has no significant differences.
Drawings
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the design of a well-known manufacturer. Based on a photo, a drawing or a video, they sketch their sketch. The length of the side posts is selected depending on the desired result. It can vary between 20 and 25 centimeters.
Materials and tools required
A homemade extender at home is assembled from the same parts as the factory extender. Specific materials depend on what type of structure is being assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This places certain demands on the material. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its inner diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to apply a sterile bandage before use and change it every time.
- The slats (side bars) are selected so that they can fix the required length for a long time. These can be matrices, rods, chrome spokes.
- The vacuum chamber and piston must be sealed. If this condition is not met, such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a variety with a camera, you should not, as written in some sources, give preference to a plastic bottle, but buy a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic homemade extender
Step-by-step assembly instructions
When making a belt or loop device, the following workflow is required:
- A piece with a diameter of 11 cm is cut out of a piece of plywood or other material with a thickness of no more than 10 mm. A hole with a circumference of at least 5. 5 cm is made inside the penis.
- The length of the rods is 20-30 cm. They screw completely into the plywood, leaving a little bit at the top. The entry points are filled with glue.
- You screw a "lamb" onto each one.
- Strips are cut out of a thin metal plate and holes are provided.
- A clamp of soft tubing or tape is inserted into the holes, which can be used as a broad-spectrum medical erole.
- Check the reliability of fixation.
The structure of the vacuum variant only differs in that there is a glass with a bulb attached at the end. Not everyone has such a device at home, but it is freely available in city pharmacies. The radius ranges from 13 to 25 mm. The selection is made according to the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length must be at least 6 cm. It can be made from elastic surgical gloves.
The air is pumped out via a light bulb or a connection with a hose. You can use the tonometer element. The shut-off valve is unscrewed from this and inserted from the other end. This allows you to change the principle of operation. The bulb starts pumping out air rather than pumping it out. As you can see, you have to tinker more than with a loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help, which clearly shows how the elements are connected and what materials they are made of.
Penis enlargement extender – tied below the knee
How and when to use?
The advice for using the device is the small size of the device (10-12 cm). This length is not a "reference length". A man decides for himself whether he is satisfied with his reproductive organ or whether he wants to have more. To enlarge the phallus, you need to wear a homemade or factory-made device for at least 4-6 hours a day. ThisDesign allows you to hide the extender under clothing. People around you won't notice.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly against the pubic bone.
- The foreskin is pulled back and a camera, loop or strap is attached to the glans. It is important to ensure that the blood flow is not disturbed (no excessive pressure, changes in skin color).
- Adjust the length of the poles. There should be no painful feeling. The parameter is gradually increased so that the organ gets used to the level of tension, i. e. the phallus is trained.
If possible, massage the penis every hour. This allows it to quickly adapt to stress. After the allotted time has elapsed, the device is removed and the flesh is kneaded with special intimate creams. The device is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of self-built structures
The advantages of a home carrier include the following parameters:
- the opportunity to try out the stretcher without purchasing a device;
- relative cheapness;
- Obtaining a design that fully corresponds to the parameters of the phallus.
There are actually very few benefits. There are even more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that ideally can be rotated, put on and taken off and does not press anywhere and does not slip.
Which extender is better – factory or homemade?
To answer this question, it is enough to compare the two types of models:
- A homemade product weighs much more than factory models. This means that the rods have to be adjusted each time over a longer period of time so that they do not compress the glans. Another point is that it is quite difficult to make a vacuum model. By the way, it is usually less effective than homemade ones with a loop and strap.
- The costs mentioned as an advantage are a relative advantage. Today there are Chinese models that are 1-3. 000 rubles cost. This is no more expensive than a homemade extender. Nobody will sell half a meter of hairpins or 20 centimeters of textolite. You have to buy a lot more material that goes unused. This makes assembling the device with your own hands only profitable if you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, as it is inconvenient to use. Dressing and undressing takes a lot of time and is also less effective given that self-massage is recommended regularly.
One conclusion can be drawn: the factory device is better. To try this method of penis enlargement, you can simply buy a cheap model
What risks may exist when using a homemade device?
Experts and experts do not recommend assembling an extender yourself without appropriate knowledge. If the device turns out to be "clumsy", presses, squeezes and causes discomfort, it is strongly not recommended to wear it. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device is not inferior in efficiency to a factory device. It will just be aesthetically unappealing. Otherwise there will be no difference, but there is a nuance here too. Many users write that hematomas, compactions and irritations form on the dermis with prolonged use.
This can be caused by poor quality materials. Finding medical silicone in a pharmacy is almost impossible. If you sell it, the properties leave much to be desired, and long-term contact will cause negative consequences.